A lovelorn woman traveled and spent 35,000 yuan to buy 20 kilograms of jadeite, but unexpectedly cut out 46 jadeite bracelets

We often hear the saying that nine out of ten times you lose in gambling, but everyone likes to have a good start. Compared to the nine losses, everyone pays more attention to the final win. The case that the editor shares today is a case of increasing the value of a raw stone by cutting it. You can get rich with one cut and cut out a mobile villa!

This piece of old pit Mu Na raw stone weighs 20 kilograms and has no windows! It is very heavy and large in size, and once shipped, the quantity will also be very large.

However, this kind of large raw stone has great ups and downs, and the probability of it rising or falling when cut is very high!

This rough stone was bought by a middle-aged woman for 35,000 yuan. It is said that the woman went out to relax after a breakup and happened to come across it and bought this rough stone by chance!

When cutting the material, usually the first step is to cut it in the middle. From the cut surface, the whole piece of raw stone has green and cotton, but the overall performance is good, and there is only a very thin layer of skin on the surface, and the rest is meat. The color of the material is also good. It is worth the 35,000 yuan!

Unfortunately, these two pieces of material have some obvious large cracks, especially the one in the middle. If there were no crack, there would be one or two more bracelet spaces!

Fortunately, it is a big crack and does not have much impact on other parts of the bracelet!

The jade carver avoided the cracks when drawing the bracelet ring to ensure that the jadeite raw stone can be used to the maximum extent.

I have already cut more than 20 bracelets from the horizontal surfaces on both sides. I can still cut more with this thickness, conservatively I can cut more than 30. The cutting capacity is steadily increasing...

Judging from the positions of these bracelets, the jade carver has preserved the floating flowers as much as possible, and these parts show a lot of green, and some of the colors even reach the level of Yang Green.

The bracelet ring can also be used to make landscape plaques or pendants, which is really a great way to make money.

After the bracelet circle is drawn, the next step is to press the bracelet. The pressing process not only requires sucking the inner and outer blanks, but every movement must be done with extreme caution. If you are not careful, the bracelet will crack, which will greatly reduce its value.

Looking at these bracelets with ready-cut cores and those waiting to be cut, aren’t they heart-warming? A total of 46 bracelets!

Below is what the finished bracelets look like. Judging from the performance of the bracelets, each one is worth around five figures!

I bought the raw stone for 35,000 yuan, and finally cut it into 46 bracelets, bracelet cores and some scraps. It can be said that the price has increased significantly.

This kind of situation where you can win big with a small investment is actually not common, but some people are just lucky and win in one go!

fcgc66

fcpf18