Jade bracelets consume the most raw materials. Just look at the processing process.

There is a saying in the jade industry that goes "one bracelet, two plaques, and three handles", which shows the value ranking of different jade jewelry. Jade bracelets are the most valuable. If they have a little bit of water quality and color, they can cost tens of thousands or hundreds of thousands. If the water quality is higher and the color is purer, the price can reach millions or sometimes even more.

Therefore, after getting a piece of raw stone, the jade carver will give priority to making it into bracelets, because bracelets are more valuable. Only if bracelets cannot be made will they consider making other jewelry. This is the consensus among jade carvers. However, it is a consensus in the industry that bracelets are very time-consuming to process.

It is indeed not easy to find the right position to cut a bracelet on a piece of rough material. This requires that the entire piece of jadeite raw stone must not have obvious cracks and defects. Because jade bracelets are made of jade, what matters is quality and water quality. Jade bracelets with poor water quality, unclear texture, flaws, and poor polishing are not considered high-quality and will affect the appearance of the jade. In addition, the quality of the jadeite raw stone is uncertain before it is polished. Even if there is some water quality inside, it is easy for the finished product to be of poor quality and the material may not be up to the mark.

Whether the jade bracelet is costly or not depends on the processing of the jade bracelet. Let's take a look at the processing of the jade bracelet:

1. First, you need to select a suitable location on the jade raw material. This location must be free of lines and cracks, and the color and quality must be at the best position for this material. There are not many such locations.

2. The jade carving master selects suitable positions on the raw material to circle and simulate. In this process, you can find that the area of ​​the bracelet is relatively large. The large area is also required to be free of cracks and flaws, which places higher requirements on the original stone.

3. Select the appropriate position for rough processing to become the bracelet blank.

4. After the rough bracelet is completed, it will be finely processed after simple adjustments.

fcgc66

fcpf18