Jade rings are not as cheap as everyone imagines. The jade eggs are often a huge piece of raw stone, but in the end only a small ring face can be produced, and the rest becomes waste. A good jade ring usually costs more than five or six figures! So many friends are very fond of him. But I don’t know what to do when the jade is worn out!

Post-processing method of grinding

The treatment methods vary depending on the degree of polishing. No matter what method is used, the main focus should be on not damaging the vital parts of the jade.

1. Polishing

If the wear or scratches are severe, it is recommended to remove the jade ring face and then polish it lightly, skillfully and economically to preserve the finish of the jade ring face to the greatest extent!

2. Polishing and waxing

If the wear is not serious, it can be simply polished and then waxed and inlaid if it is urgently needed to be worn!

3. Inlay after processing

After the ring face has been processed, it may become loose and misaligned when it is re-set. If conditions permit, the ring setting can be replaced to better protect the ring face.

How to maintain?

Take off your jade ring when bathing or exercising, as sweat and shower gel will corrode the surface of jade.

In addition, regular cleaning is required, but avoid using abrasive laundry detergents, cleaners and toothpastes, as well as boiling water. After cleaning, use a small amount of special oil to moisturize and maintain, thereby improving the luster and smoothness of the jade.

Finally, during the wearing process, reduce the collision with objects, avoid high temperature, and regularly check whether there is any looseness to prevent the ring face from

fruit

fcgc33