What are the detailed steps in jade processing? How complicated is it to make jade into jewelry?

Material selection is the first step in jade processing, and it has a very important impact on the subsequent processing links. Because the raw materials of jade mostly have skin, it has a "gambling nature". Jade is also the only jade variety with skin. People call gambling on stone is gambling on jade. The selection of materials is determined by what finished product is to be processed, and the requirements for material selection vary for different finished products. If you are making ornaments or hand-held items, you need to choose larger materials; if you are making general pendants, ring faces and other small items, you need better materials.

The second step in jade processing is cutting. When cutting, it is necessary to observe the surface characteristics of the jade, such as the distribution and direction of color, the distribution and development of cracks, and the analysis and estimation of the internal and external changes in water quality. If the surface of the jade is good and useful for subsequent carving, it cannot be peeled off at will. Sometimes using different colors on the surface of the jade for design and carving can add color to the jade and increase the value of the jade. Next, use a cutting machine to cut the jade according to the required size. The first choice for slicing is bracelets, based on the principle of not destroying the color of the jade. The larger the slices, the better. The rest can be made into pendants and the like.

The third step in jade processing is design. Generally, the design of jade can be done directly by drawing on the jade material. However, if some jade materials are large, precious, or have complex colors and materials, it is necessary to repeatedly consider the design on the drawing to retain the jade material to the greatest extent and highlight the characteristics of the jade.

The fourth step in jade processing is rough carving, which is also called embryo making. After drawing the picture, use tools to carve out the rough outline first, and then carve the large internal surface. When engraving, you can replace various diamond drill bits according to your needs. Diamond drill bits are differentiated by mesh size.

The fifth step in jade processing is fine carving. After rough carving, the approximate outline and carving direction have been determined. The carving and washing during rough carving make the surface design blurred, so you can use an oil pen to redraw the picture on the jade material, mark the carving details and carving techniques, and then carry out the carving of the details. The purpose of fine carving is to further refine the shape of the jade material.

The sixth step in jade processing is polishing. Currently, there are two main jade polishing methods on the market: machine polishing and hand polishing. Machine polishing is generally aimed at jade carvings of average quality. A large number of works can be processed in a short period of time, such as some ring faces, beads, etc. Hand polishing requires polishing each piece one by one, which is time-consuming and expensive, but jadeites with fine workmanship and good materials tend to be hand polished.

The last step in jade processing is decoration. After polishing, it becomes a finished product and can be sold directly, or it can be sold with some decorations as needed, such as adding ropes to some handles, or inlaying some carvings into necklaces, rings, brooches, etc. Some ornaments will be equipped with a base such as a wood carving.

fcgc66

fcpf18