The process of taking the jadeite raw material to make the ring face, watch carefully, if you don't do it well, you will lose money...

When a jade dealer faces a piece of rough material, the first thing he considers is whether he can make a ring face out of it. The second thing he considers is bracelets, and only then can the remaining material be made into pendants and other items. In other words, only the most perfect part of the jade will be carefully taken out, meticulously ground and polished to make a ring face. Therefore, the ring face is also called the "eyes" of jade, and is the precious soul of jade.

The process is very simple, the key is how to make the ingredients. The best effect can be achieved by taking care of the color and type of the ring surface to remove defects and impurities. These require experience and are also the most difficult. A ring material that costs ten thousand yuan can have a very high value after it is completed. If you don’t do it right, you will lose money.

Generally, when you buy a ring face rough material and want to make a ring face, you first take out the part that needs to be polished. Then polish it to see how to grind it specifically, grind off the defects, cracks, obvious impurities, etc., polish it again, look at it further, and then grind it again. It is polished step by step like this.

These are the ring faces that were taken out. They are of different sizes. They look beautiful, don’t they?

The emerald green ring faces are all plump and beautiful!

fcgc66

fcpf18