What should I do if my jade ring is scratched? It's actually very simple

Although jade is very hard, there is a risk of scratching it if worn for a long time. So when we encounter such a situation, how should we deal with and maintain it?

1. How to make

A high-quality jade ring has very high requirements on the material. Color, water quality, purity, and absence of impurities and cracks are all indispensable conditions. Only such a ring will have practical and artistic value.

After the jade raw material is cut, if the effect of making a ring face can be achieved, the part to be polished should be taken out, and then it should be polished (shaped) according to the specific situation, and the unnecessary and problematic areas should be polished and waxed to present a perfect ring face. At the same time, it is very difficult to make a good ring face.

Second, post-grinding treatment method

The treatment methods vary depending on the degree of polishing. No matter what method is used, the main focus should be on not damaging the vital parts of the jade.

1. Polishing

If the wear or scratches are severe, it is recommended to remove the jade ring face and perform simple polishing. The polishing at this time should be light, skillful and economical to preserve the integrity of the jade ring face to the greatest extent.

2. Polish and wax again

If the wear is not serious, remove the ring face, simply polish it, wax it, and then set it before wearing.

3. Mosaic after processing

After the ring face has been processed, it may become loose and misaligned when it is re-set. If conditions permit, the ring setting can be replaced to better protect the ring face.

3. How to maintain and avoid scratches

Jadeite should also be cleaned and maintained regularly, and developing good inspection and maintenance habits will ensure the longevity and gloss of jadeite.

1. It is best to take off the jade when bathing or exercising, because bath fluid and sweat will corrode the surface and easily cause the luster to fade.

2. Clean the jade regularly, but avoid using laundry detergents, cleaners and toothpaste containing abrasives, as well as boiling water. After cleaning, you can use a small amount of special oil to moisturize and maintain the jade, which can lock the moisture loss of the jade and also improve the gloss and smoothness of the jade.

3. During wearing, you should reduce collision with hard objects and avoid high temperature.

4. Check the inlay regularly to see if it is loose. If there is any problem, deal with it in time to prevent the loss of the ring face.

fcgc66

fcpf18