The whole process of making jade bracelets, the polishing method of jade bracelets

What we usually see are flawless jade bracelets, so how are these bracelets made?

First, polish the stone and make a cut on the surface of the raw stone to make it easier to observe the inside under a light to determine whether there is green, as well as the depth, width and concentration of the green. The merchants will then judge whether the raw stone can be made into bracelets based on the cracks, and only then will they consider pendants, ring faces, and beads. Bracelets can be said to be the essence of jadeite raw stones.

Jade bracelet production process

1. Cut the block of raw stone into sheets of different thicknesses based on experience.

Jade bracelet production process

2. Decide the size of the bracelet based on the cracks, size, and color distribution of the raw materials to achieve the best type and color of the bracelet and maximize the output.

Jade bracelet production process

3. According to the diameter of the outer ring of the jade stone with the marked bracelet position, match it with the corresponding drill bit and suck out the entire bracelet, which is called "sucking out the outer embryo" in the industry; according to the diameter of the inner ring of the bracelet, choose a drill bit to suck out the inner ring, which is called "sucking out the inner embryo" in the industry.

Jade bracelet production process

Jade bracelet production process

4. Removing defects and cracks from the rough piece is called topping; removing the edges and corners of the bracelet and grinding it into a smooth shape is called edging. The curvature of round bracelets and flat bracelets is different, so the angle and strength when punching the blank are also different.

Jade bracelet production process

Jade bracelet production process

5. After the blank is punched, polish off the marks on the rough blank and completely shape it from the inside out. Polish the polished bracelet back and forth several times until it reaches the desired brightness.

Jade bracelet production process

Jade bracelet production process

6. Finally, the ice-type jade bracelet with floating flowers is made, which is very refreshing and beautiful as shown in the picture below.

fcgc66

fcpf18