Detailed analysis of how to cut jadeite raw stones to maximize profits

How to realize the maximum economic value of a piece of jadeite raw stone

In the jade industry, material decomposition is a very important thing

Whether the cutting is good, how to cut, and how much to cut are not something that can be decided casually.

Generally speaking, the steps of cutting jadeite gambling stones are: inspecting materials - cutting stones - inspecting materials - cutting stones

The initial review is to find the right starting point

An inappropriate cutting point may damage the jadeite inside the jadeite raw stone.

The first stone cutting is to get a more accurate understanding of the internal situation.

Then, based on the first inspection, we can understand the green distribution in the gambling stone.

Find the most suitable cutting point, and finally cut the stone

In this way, the jade inside the jade gambling stone can be displayed as perfectly as possible and its true value can be demonstrated.

When deciding to cut a stone, make sure you have a full understanding of the stone.

You need to be familiar with the performance of the stone's skin and the lighting effect.

It is clear which part performs well, where there are cracks, and what can be done.

In this way, you can determine the position and know where to cut the increase, instead of being obsessed with getting rich overnight.

Before cutting the gambling stone, if you can't see the water quality when you shine the light, you can brush the surface of the stone with an iron brush.

Brush the skin to see if it has water.

Then use a tooth machine to open a window on the stone, bet first, and determine the jade quality and crack direction inside the stone

I have decided to cut, but I am not sure where to cut. What should I do?

At this time, you can start from the raised part of the gambling stone surface or one end that extends out.

Cut a thin slice and observe the color, water head, and cracks

The first cut is the key. In a sense, slicing is also the first cut.

However, the slices are not cut deeply, but are used for observation and judgment before cutting in the selected direction.

If you see cracks on the surface or inside, you must cut in the direction of the cracks.

If it is a pigment, the most valuable part is the green. Be sure not to destroy the green when cutting.

You can't just kill it without enough experience.

Cut slowly from the worst part first, the loss will not be too great

After cutting it out, you need to know how to do it. The bigger the finished product, the harder it is to make.

So, if you can make bracelets, make them first, and then consider making small accessories with the rest.

If the material is not good or has many cracks, it will be made into flower pieces or carvings.

A good cutting master is very important, he may give you valuable suggestions

If you choose the right materials and make the most of them, you will get higher profits!